September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC Detection Logic
WARNING: This page is about a different car, the 2017 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If DTC B2110 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC
.
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B210F |
INTRLCK/PNP SW OFF |
IPDM E/R detects a difference between the following signals
- P/N position signal from transmission range switch and P/N position signal (CAN) from BCM (CVT models)
- Clutch pedal operation signal from clutch interlock switch and interlock signal (CAN) from BCM (M/T models)
|
- Harness or connectors
(The CAN communication line is open or shorted.)
- Harness or connectors
(Transmission range switch circuit is open or shorted.)
(Clutch interlock switch circuit is open or shorted.)
- Transmission range switch
- Clutch interlock switch
- IPDM E/R
- BCM
|