LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Sentra S, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Unit Disassembly And Assembly >> Final Drive >> Assembly
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Final Drive: Assembly

  1. Install final gear, and then tighten final gear mounting bolts to the specified torque.
    CAUTION: Replace final gear and differential case as a set.
  2. Install differential side bearing inner race (clutch housing side) using a suitable tool (A).
    CAUTION: Replace differential side bearing inner race (clutch housing side) and differential side bearing outer race (clutch housing side) as a set.
    Fig 1: Installing Differential Side Bearing Inner Race Using Tool (Clutch Housing Side)
    G08989648Courtesy of NISSAN NORTH AMERICA, INC.
  3. Install differential side bearing inner race (transaxle case side) using a suitable tool (A).
    CAUTION: Replace differential side bearing inner race (transaxle case side) and differential side bearing outer race (transaxle case side) as a set.
    Fig 2: Installing Differential Side Bearing Inner Race Using Tool (Transaxle Case Side)
    G08989649Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals