July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Work Procedure

CHECK IGNITION TIMING
1. Attach timing light to loop wires as shown below.
  - Timing light (A)
  - in figure below : Arrow: Vehicle front
  Fig 1: Checking Ignition Timing Using Timing Light
  Courtesy of NISSAN NORTH AMERICA, INC.
2. Check ignition timing.
  : INSPECTION END
  
  Fig 2: Aligning Pointer With TDC Mark On Crankshaft Pulley
  Courtesy of NISSAN NORTH AMERICA, INC.