LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Leaf S >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> EV Control System (Introduction) >> Basic Inspection >> Accelerator Pedal Released Position Learning >> Work Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Work Procedure

  1. START 
    1. Check that accelerator pedal is fully released.
    2. Turn power switch ON and wait at least 2 seconds.
    3. Turn power switch OFF and wait at least 20 seconds.
    4. Repeat steps 2 and 3 for 4 times.
    5. Turn power switch OFF and wait at least 20 seconds.

    : END

scientia non olet · About LEMON Manuals