LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2013 >> Juke SL, FWD, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing, Periodic Maintenance And Removal And Installation >> Refrigerant Pressure Sensor >> Component Function Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Function Check

  1. CHECK REFRIGERANT PRESSURE SENSOR OVERALL FUNCTION 
    1. Start engine and warm it up to normal operating temperature.
    2. Turn A/C switch and blower fan switch ON.
    3. Check the voltage between ECM harness connector and ground.
      ECM Voltage
      Connector + -
      Terminal
      F25 19 12 1.0 - 4.0V

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Proceed to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals