LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Versa SV >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (Engine Control System - Introduction (Hatchback)) >> Service Information >> Basic Service Procedure >> Procedure After Replacing ECM
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Procedure After Replacing ECM

WARNING: This page is about a different variant/trim than selected.

When replacing ECM, the following procedure must be performed.

  1. Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs. Refer to "ECM RE-COMMUNICATING FUNCTION ".
  2. Perform "VIN REGISTRATION ".
  3. Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".
  4. Perform "THROTTLE VALVE CLOSED POSITION LEARNING ".
  5. Perform "IDLE AIR VOLUME LEARNING ".
scientia non olet · About LEMON Manuals