LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Versa SV >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Steering Control System) >> EPS >> System Description >> Diagnosis System (EPS Control Unit) >> CONSULT-III Function >> Data Monitor Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Data Monitor Mode

WARNING: This page is about a different car, the 2011 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

Display Item List

DISPLAY ITEM LIST

Monitor item (Unit) Remarks
MOTOR VOL (V) Displays the power supply voltage for EPS control unit.
TORQUE SENSOR (Nm) Displays steering wheel turning force detected by torque sensor.
MOTOR CURRENT (A) Displays the current value consumed by EPS motor.
MOTOR SIG (A)(1) Displays the current commanded value to EPS motor.
DERATING STAT (ON/OFF%) Protect overload status is displayed.
VEHICLE SPEED (km/h) or (MPH)(2) Vehicle speed is displayed from vehicle speed signal via CAN communication.
WARNING LAMP (On/Off) EPS warning lamp control status is displayed.
ENGINE STATUS (Stop/Run) Engine speed is displayed from engine status signal via CAN communication.
(1) Almost in accordance with the value of MOTOR SIG. It is not a malfunction though these values are not accorded when steering quickly.
(2) It is not a malfunction, though it might not be corresponding just after ignition switch in turned ON.
scientia non olet · About LEMON Manuals