LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Service Information >> Coil Spring >> Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation: Removal

  1. Set jack under rear suspension beam.
  2. Remove both shock absorber lower bolts (A).
  3. Gradually lower the jack, and then remove coil spring, bound bumper and rear spring rubber seat.
Fig 1: Identifying Shock Absorber Lower Bolt
G04927249Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals