Component Inspection (FPCM)

WARNING: This page is about a different car, the 2011 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUEL PUMP

Check the voltage between FPCM terminals under the following condition.

TERMINAL VOLTAGE REFERENCE CHART

FPCM			Condition	Voltage (Approx.)
Connector	+	-
Connector	Terminal
B41	7	6	For 1 second after turning ignition switch ON	8.5 V
			More than 1 second after turning ignition switch ON	0 V
			Idle speed	8.5 V

Is the inspection result normal?

YES: INSPECTION END

NO: Replace FPCM. Refer to "REMOVAL AND INSTALLATION ".