LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Murano LE, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (Except CROSSCABRIOLET) >> Fuel Injector >> Component Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Inspection

  1. CHECK FUEL INJECTOR
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as per the following.
    Terminals Resistance
    1 and 2 11.1 - 14.5 Ω [at 10 - 60°C (50 - 140°F)]
    Fig 1: Checking Fuel Injector
    G08479304Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace malfunctioning fuel injector. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals