LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0137 To P0445 (CALIFORNIA) >> DTC P0197, P0198: EOT Sensor >> Component Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Inspection

  1. CHECK ENGINE OIL TEMPERATURE SENSOR
    1. Turn ignition switch OFF.
    2. Disconnect engine oil temperature sensor harness connector.
    3. Remove engine oil temperature sensor. Refer to "EXPLODED VIEW ".
    4. Check resistance between engine oil temperature sensor terminals by heating with hot water as shown in the figure.
      Engine oil temperature sensor Condition Resistance (kΩ)
      + -
      Terminal
      1 2 Temperature [°C (°F)] 20 (68) 2.37 - 2.63
      50 (122) 0.68 - 1.00
      90 (194) 0.236 - 0.260
      Fig 1: Checking Engine Oil Temperature (EOT) Sensor
      G08128924Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES >> INSPECTION END

      NO >> Replace engine oil temperature sensor. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals