LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2012 >> 370Z Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> DTC/Circuit Diagnosis >> Hood Switch >> Component Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Inspection

  1. CHECK HOOD SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect hood switch connector.
    3. Check continuity between hood switch terminals.
      Hood switch Condition Continuity
      Terminal
      1 2 Hood switch Pressed Not existed
      Released Existed

      Is the inspection result normal? 

      YES >> INSPECTION END

      NO >> Replace hood lock (RH). Refer to , REMOVAL AND INSTALLATION (Coupe models) or , REMOVAL AND INSTALLATION (Roadster models).

scientia non olet · About LEMON Manuals