July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Procedure

SELF-DIAGNOSIS RESULT CHECK

Check the self-diagnosis results.

SELF-DIAGNOSIS RESULTS

Self-diagnosis results
ST ANG SEN COM CIR
CAN COMM CIRCUIT

Is the above displayed in the self-diagnosis display items?

YES: GO TO 2.

NO: Inspection End.

CHECK CONNECTOR
1. Disconnect the ABS actuator and electric unit (control unit) connector, and check the terminals for deformation, disconnection, looseness, and so on. If there is a malfunction, repair or replace the terminals.
2. Reconnect connector to perform self-diagnosis. Refer to "CONSULT-III FUNCTION (ABS) ".
  Is "CAN COMM CIRCUIT" displayed in the self-diagnosis display items?
  
  YES: Refer to "TROUBLE DIAGNOSIS FLOW CHART ".
  
  NO: Connector terminal connection is loose, damaged, open, or shorted.