DTC Detection Logic
DTC DETECTION LOGIC CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| P0335 |
Crankshaft position sensor (POS) circuit |
- The crankshaft position sensor (POS) signal is not detected by the ECM during the first few seconds of engine cranking.
- The proper pulse signal from the crankshaft position sensor (POS) is not sent to ECM while the engine is running.
- The crankshaft position sensor (POS) signal is not in the normal pattern during engine running.
|
- Harness or connectors [Crankshaft position (CKP) sensor (POS) circuit is open or shorted.]
[Accelerator pedal position (APP) sensor 2 circuit is shorted.]
(EVAP control system pressure sensor circuit is shorted.)
(Refrigerant pressure sensor circuit is shorted.)
- CKP sensor (POS)
- APP sensor
- EVAP control system pressure sensor
- Refrigerant pressure sensor
- Signal plate
|