July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Inspection

CHECK ASCD STEERING SWITCH

Disconnect combination switch (spiral cable) harness connector M352.
Check the continuity between combination switch harness connector terminals under following conditions.

CONTINUITY SPECIFICATION

Combination meter		Condition	Resistance
Connector	Terminals	Condition	Resistance
M352	18 and 21	MAIN switch: Pressed	Approx. 0 Ω
		CANCEL switch: Pressed	Approx. 250 Ω
		SET/COAST switch: Pressed	Approx. 660 Ω
		RESUME/ACCELERATE switch: Pressed	Approx. 1,480 Ω
		All ASCD steering switches: Released	Approx. 4,000 Ω

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ASCD steering switch