July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Inspection

CHECK DOOR SWITCH

Turn ignition switch OFF.
Disconnect door switch connector.

Check door switch.

TERMINAL CONTINUITY CHART

Terminal			Condition	Continuity
Each door	2	Ground	Door switch pressed	Exists
Each door	2	Ground	Door switch released	Does not exist
Back door	3	4	Back door open	Exists
Back door	3	4	Back door close	Does not exist

Is the inspection result normal?

YES: Door switch is OK.

NO: Replace Door switch. Refer to "REMOVAL AND INSTALLATION ".