October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Function Check

PERFORM COMPONENT FUNCTION CHECK

Turn ignition switch ON.
Check the voltage between ECM harness connector and ground under the following conditions.

TERMINAL VOLTAGE REFERENCE CHART

ECM		Ground	Condition		Voltage
Connector	Terminal	Ground	Condition		Voltage
F8	69 (PNP switch signal)	Ground	Selector lever	P or N (CVT) Neutral (M/T)	Approx. 0 V
F8	69 (PNP switch signal)	Ground	Selector lever	Except above	Battery voltage

Is the inspection result normal?

YES: INSPECTION END

NO: Go to "DIAGNOSIS PROCEDURE ".