LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> Versa Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> ASCD Indicator >> Diagnosis Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Diagnosis Procedure

  1. CHECK OVERALL FUNCTION

    Check ASCD indicator under the following conditions.

    SPECIFICATION CHART

    ASCD INDICATOR CONDITION SPECIFICATION
    CRUISE LAMP
    • Ignition switch: ON
    		 MAIN switch: Pressed at 1st time → 2nd ON → OFF
    SET LAMP
    • MAIN switch: ON
    • Vehicle: Between 40 km/h (25 MPH) and 144 km/h (89 MPH)
    		 ASCD: Operating ON
    ASCD: Not operating OFF

    OK or NG 

    OK : INSPECTION END 

    NG : GO TO 2.

  2. CHECK DTC

    Check that DTC U1000 or U1001 is not displayed.

    Yes or No 

    Yes : Perform trouble diagnoses for DTC U1000, U1001, refer to DTC U1000, U1001 CAN COMMUNICATION LINE .

    No : GO TO 3.

  3. CHECK COMBINATION METER OPERATION

    Does combination meter operate normally?

    Yes or No 

    Yes : GO TO 4.

    No : Check combination meter circuit. Refer to COMBINATION METERS .

  4. CHECK INTERMITTENT INCIDENT

    Refer to TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT .

    INSPECTION END 

scientia non olet · About LEMON Manuals