LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> Sentra SL >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - Component Testing (MR20DE-CALIFORNIA) >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    CONTINUITY SPECIFICATION

    Condition Continuity
    Clutch pedal: Fully released. Should exist.
    Clutch pedal: Slightly depressed. Should not exist.
    Fig 1: Checking Continuity Between ASCD Brake Switch Terminals 1 And 2
    G04895072Courtesy of NISSAN MOTOR CO., U.S.A.

    If NG, adjust ASCD clutch switch installation, refer to CLUTCH PEDAL , and perform step  3 again.

scientia non olet · About LEMON Manuals