Terminal and Reference Value for Main Power Window and Door Lock/Unlock Switch
With left front only power window anti-pinch system.
VOLTAGE SPECIFICATION
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) |
|---|---|---|---|---|
| 1 | R/Y | Rear power window LH UP signal | When rear LH switch in main power window and door lock/unlock switch is operated UP | Battery voltage |
| 2 | W/B | Limit switch encoder ground | - | 0 |
| 3 | R/B | Rear power window LH DOWN signal | When rear LH switch in main power window and door lock/unlock switch is operated DOWN | Battery voltage |
| 5 | L/W | Rear power window RH DOWN signal | When rear RH switch in main power window and door lock/unlock switch is operated DOWN | 0 → Battery voltage |
| 7 | R | Rear power window RH UP signal | When rear RH switch in main power window and door lock/unlock switch is operated UP | 0 → Battery voltage |
| 8 | G/R | Front power window motor RH UP signal | When power window motor is operated UP | 0 → Battery voltage |
| 9 | G/W | Limit switch signal | Front power window LH is between fully-open and just before fully-closed position (ON). | 0 |
| Front power window LH is between just before fully-closed position and fully-closed position (OFF). | 5 | |||
| 10 | W/R | RAP signal | - | Battery voltage |
| 11 | L/R | Front power window motor RH DOWN signal | When power window motor is operated DOWN | 0 → Battery voltage |
| 12 | L/R | Front power window motor LH DOWN signal | When power window motor is operated DOWN | 0 → Battery voltage |
| 13 | G/Y | Encoder pulse signal | Power window motor operation. | |
| 15 | G/R | Encoder power supply | - | 5 → Battery voltage |
| 16 | L | Front power window motor LH UP signal | When power window motor is operated UP | 0 → Battery voltage |
| 17 | B | Ground | - | 0 |
| 19 | P | Battery power supply | - | Battery voltage |