October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Pump

Disconnect "fuel level sensor unit and fuel pump" harness connector.
Check resistance between "fuel level sensor unit and fuel pump" terminals 1 and 3.
Resistance: Approximately 0.2 - 5.0 Ω [at 25°C (77°F)]
If NG, replace "fuel level sensor unit and fuel pump".

Fig 1: Checking Resistance Between Fuel Level Sensor Unit And Fuel Pump Terminals 1 And 3
Courtesy of NISSAN MOTOR CO., U.S.A.