September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Diagnosis Procedure

INSPECTION START
1. Turn ignition switch ON.
2. Erase DTC.
3. Perform DTC Confirmation Procedure.
  See "DTC LOGIC ".
4. Check DTC.
  Is the DTC P0607 displayed again?
  
  YES: GO TO 2.
  
  NO: INSPECTION END
REPLACE ECM
1. Replace ECM.
2. Go to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ECM) : SPECIAL REPAIR REQUIREMENT ".
  INSPECTION END