Seatback Assembly: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Seats equipped with side air bags can only be serviced as an assembly.

Remove the seat assembly. Refer to "REMOVAL AND INSTALLATION ".
Unzip the seatback trim flap (1).
Unclip the lower retainer (2).

Fig 1: Identifying Seatback Trim Flap And Lower Retainer
Courtesy of NISSAN NORTH AMERICA, INC.
For the passenger seatback, remove the seatback board from the seatback. Refer to "PASSENGER SEATBACK BOARD ".
Unclip the seatback trim J-clips.

Fig 2: Removing Retainer
Courtesy of NISSAN NORTH AMERICA, INC.
Remove the bolts (two for each side) and the seatback assembly.

Fig 3: Locating Seatback Assembly Bolts
Courtesy of NISSAN NORTH AMERICA, INC.