Diagnostic Procedure

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-II
1. Turn ignition switch "ON" and start engine.
2. Select "SELF-DIAG RESULTS" mode for "A/T" with CONSULT-II.
  
  Fig 1: Identifying CONSULT II Display - SELF-DIAG RESULTS
Is any malfunction of the "CAN COMM CIRCUIT" indicated?

YES: Print out CONSULT-II screen, GO TO LAN section. Refer to "CHECK OF CAN SYSTEM TYPE (HOW TO USE CAN SYSTEM TYPE SPECIFICATION CHART) ".

NO: INSPECTION END