October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
With GST
- Turn ignition switch ON.
- Check voltage between ECM terminal 102 (PNP switch signal) and ground under the following conditions.
TERMINALS VOLTAGE CHART
| Condition (Shift lever) |
Voltage V (Known-good data) |
P or N position (CVT)
Neutral position (M/T) |
Approx. 0 |
| Except above |
BATTERY VOLTAGE (11 - 14V) |
- If NG, go to
"DIAGNOSTIC PROCEDURE ".
Courtesy of NISSAN MOTOR CO., U.S.A.