LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Sentra SE-R >> Repair and Diagnosis >> Electrical >> Gauges >> Driver Information System >> Warning Chime >> Combination Meter Buzzer Circuit Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Combination Meter Buzzer Circuit Inspection

  1. CHECK CHIME OPERATION 
    1. Select "BUZZER" of "BCM" on CONSULT-III.
    2. Perform "LIGHT WARN ALM" or "IGN KEY WARN ALM" of "ACTIVE TEST".

    Does chime sound? 

    YES: Combination meter buzzer circuit is OK. Return to "SYMPTOM CHART ".

    NO: GO TO 2.

  2. CHECK COMBINATION METER INPUT SIGNAL 
    1. Select "METER/M&A" on CONSULT-III.
    2. Turn on hazard switch or lighting switch while monitoring "BUZZER" of "DATA MONITOR" and check operation status.

      "BUZZER" 

      While hazard switch or lighting switch is ON : ON and OFF repeatedly 

      Except above : OFF 

    OK or NG 

    OK: Check battery power supply circuit of combination meter. If OK, replace combination meter. Refer to "COMBINATION METER ".

    NG: Replace BCM. Refer to "REMOVAL AND INSTALLATION OF BCM ".

scientia non olet · About LEMON Manuals