LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Rogue SL, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (MEXICO) >> Component Diagnosis [For MEXICO] >> P0327, P0328 KS >> Component Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Inspection

  1. CHECK KNOCK SENSOR
    1. Turn ignition switch OFF.
    2. Disconnect knock sensor harness connector.
    3. Check resistance between knock sensor terminals as follows.
      NOTE: It is necessary to use an ohmmeter which can measure more than 10 MΩ.
      TERMINALS RESISTANCE REFERENCE

      Terminals Resistance
      1 and 2 Approx. 532 - 588 kΩ [at 20°C (68°F)]
    CAUTION: Do not use any knock sensors that have been dropped or physically damaged. Use only new ones.

    Is the inspection result normal?

    YES: INSPECTION END

    NO: Replace knock sensor.

scientia non olet · About LEMON Manuals