LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Quest SE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P1211 Through P2A03 >> DTC P2100, P2103 Throttle Control Motor Relay >> DTC Confirmation Procedure >> Procedure For DTC P2103
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Procedure For DTC P2103

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 8V. 

  1. Turn ignition switch ON and wait at least 1 second.
  2. Check 1st trip DTC.
  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals