LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Altima Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Hybrid) >> Component Diagnosis >> P2118 Throttle Control Motor >> DTC Logic >> DTC Confirmation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON and wait at least 2 seconds.
    2. Turn ignition switch ON (READY).
    3. Depress the accelerator pedal to start engine, then keep engine running for at least 5 seconds.
    4. Check DTC.

    Is DTC detected? 

    YES : Go to "DIAGNOSIS PROCEDURE ".

    NO : INSPECTION END

scientia non olet · About LEMON Manuals