LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Altima Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Hybrid) >> Component Diagnosis >> P1195 Engine Does Not Start >> DTC Logic >> DTC Confirmation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON (READY).
    2. Depress accelerator pedal and wait at least 15 seconds.
    3. Check DTC.

    Is DTC detected? 

    YES : Go to "DIAGNOSIS PROCEDURE ".

    NO : INSPECTION END

scientia non olet · About LEMON Manuals