LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Murano SE >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Abs >> Trouble Diagnosis For System >> CAN Communication Circuit >> Inspection Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Inspection Procedure

  1. CHECK CONNECTOR 
    1. Turn ignition switch "OFF".
    2. Disconnect the ABS actuator and electric unit (control unit) connector, and check the terminal for deformation, disconnection, looseness, and so on. If there is a malfunction, repair or replace the terminal.
    3. Reconnect connector to perform self-diagnosis.
      SELF-DIAGNOSTIC RESULTS REFERENCE

      Self-diagnostic results
      CAN COMM CIRCUIT

    Is "CAN COMM CIRCUIT" displayed in the self-diagnosis display?

    YES: Print out the self-diagnostic results, and refer to , "CAN SYSTEM SPECIFICATION CHART ".

    NO: Connector terminal connector is loose, damaged, open, or shorted.

scientia non olet · About LEMON Manuals