Precautions for TCM and CVT Assembly Replacement: Notes
When replacing CVT assembly or TCM, refer to the pattern table below and erase the EEPROM in the TCM if necessary.
CAUTION:
- Check if new data (Unit ID) are entered correctly after replacing CVT assembly and erasing data in TCM. (Connect CONSULT-II, and then turn ignition switch OFF.)
- "TCM POWER SUPPLY [P1701]" may be indicated soon after replacing TCM or CVT assembly (after erasing the memory). Restart the self-diagnosis after erasing the self-diagnosis result. Check that no error is detected.