LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Frontier XE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (Qr) >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    CONTINUITY SPECIFICATIONS

    Condition Continuity
    Brake pedal: Fully released Should exist
    Brake pedal: Slightly depressed Should not exist

    If NG, adjust ASCD clutch switch installation, refer to "CLUTCH PEDAL ", and perform step  3 again.

    Fig 1: Checking Harness Continuity Between ASCD Brake Switch Terminals 2 And 1
    G04875415Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals