LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Altima SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Automatic Transmission) >> DTC Tests >> DTC P1702 Transmission Control Module (Ram) >> DTC Confirmation Procedure >> With CONSULT-II
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON". (Do not start engine.)
  2. Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  3. Start engine.
  4. Run engine for at least 2 consecutive seconds at idle speed.
  5. If DTC is detected, go to DIAGNOSTIC PROCEDURE .
    Fig 1: CONSULT-II Display
    G00726644Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals