LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Quest SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 341 (Engine Control System) >> DTC P0507: ISC System >> DIAGNOSTIC TROUBLE CODES Confirmation Procedure >> With Consult-II
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

With Consult-II

WARNING: This page is about a different car, the 2005 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open engine hood.
  2. Start engine and warm it up to normal operating temperature.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON again and select "DATA MONITOR" mode with CONSULT-II.
  5. Start engine and run it for at least 1 minute at idle speed.
  6. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE 
    Fig 1: CONSULT-II Data Monitor Screen
    G02410292Courtesy of NISSAN MOTOR CO., U.S.A.