LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Quest Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Engine Control System) >> DTC P2135: TP Sensor >> DTC Confirmation Procedure >> With Consult-II
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With Consult-II

WARNING: This page is about a different car, the 2005 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 1 second.
  4. If DTC is detected, go to DIAGNOSTIC PROCEDURE .
    Fig 1: CONSULT-II Display - "DATA MONITOR" Mode
    G02444164Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals