LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Pathfinder SE, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P1225: TP Sensor >> Diagnostic Trouble Codes Confirmation Procedure >> With Consult-II
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: CONSULT-II Display - Data Monitor Mode
    G02432140Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch OFF, wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About LEMON Manuals