System Description: Inputs
Power is supplied at all times
- to BCM terminal 55
- through 50A fusible link (letter f , located in the fuse and fusible link box).
- to BCM terminal 42
- through 10A fuse [No. 21, located in the fuse block (J/B)].
When the ignition switch is ON, power is supplied
- to BCM terminal 37
- through key switch and key lock solenoid terminals 3 and 4
- through 10A fuse [No. 21, located in the fuse block (J/B)].
When the ignition switch is ACC or ON, power is supplied
- to BCM terminal 11
- through 10A fuse [No. 6, located in the fuse block (J/B)].
When the ignition switch is ON or START, power is supplied
- to BCM terminal 38
- through 10A fuse [No. 1, located in the fuse block (J/B)].
Ground is supplied
- to BCM terminal 52
- through body grounds M57, M61 and M79.
When the front door switch LH is ON (door is OPEN), ground is supplied
- to BCM terminal 62
- through front door switch LH terminal 2
- to front door switch LH case ground.
When the front door switch RH is ON (door is OPEN), ground is supplied
- to BCM terminal 12
- through front door switch RH terminal 2
- to front door switch RH case ground.
When the rear door switch LH is ON (door is OPEN), ground is supplied
- to BCM terminal 63
- through rear door switch LH terminal 1
- to rear door switch LH case ground.
When the rear door switch RH is ON (door is OPEN), ground is supplied
- to BCM terminal 13
- through rear door switch RH terminal 1
- to rear door switch RH case ground.
Keyfob signal is inputted to BCM (the antenna of the system is combined with BCM).
The remote keyless entry system controls operation of the
- power door lock
- trunk lid opener
- interior lamp and step lamps
- panic alarm
- hazard and horn reminder
- keyless power window down (open)
- auto door lock operation