October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Keyfob Battery And Function Check

CHECK KEYFOB BATTERY
Remove battery and measure voltage across battery positive and negative terminals, (+) and (-).

Voltage : 2.5V - 3.0V

NOTE: Keyfob does not function if battery is not set correctly.

OK or NG
- OK : GO TO 2.
- NG : Replace battery. Refer to "KEYFOB BATTERY REPLACEMENT ".
  
  Fig 1: Measuring Voltage Across Battery Positive And Negative Terminals
  Courtesy of NISSAN MOTOR CO., U.S.A.

CHECK KEYFOB FUNCTION

With CONSULT-II

Check keyfob function in "DATA MONITOR" mode with CONSULT-II.

When pushing each button of keyfob, the corresponding monitor item should be turned as follows.

DATA MONITOR

Condition	Monitor item
Pushing LOCK	LK BUTTON/SIG	: ON
Pushing UNLOCK	UN BUTTON/SIG	: ON
Pushing TRUNK	TRUNK BTN/SIG	: ON
Pushing PANIC	PANIC BTN	: ON
Pushing LOCK and UNLOCK at the same time	LK/UN BTN ON	: ON

Fig 2: CONSULT-II Display - Keyfob

G02523606

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK : Keyfob is OK. Further inspection is necessary. Refer to "SYMPTOM CHART ".
NG : Replace keyfob.