LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Altima SE-R, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brake Control System >> Brake Control System - TCS/Abs >> Trouble Diagnosis >> CONSULT-II Function (ABS) >> Data Monitor Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Data Monitor Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
    Fig 1: Identifying Data Link Connector
    G02523259Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch ON.
  4. Touch "START (NISSAN BASED VHCL)" on CONSULT-II screen.
    Fig 2: CONSULT-II Diagnosis Function Display (1 Of 3)
    G02523260Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS".
    Fig 3: CONSULT-II Diagnosis Function Display (2 Of 3)
    G02523261Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "DATA MONITOR".
    Fig 4: CONSULT-II Diagnosis Function Display (3 Of 3)
    G02523262Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Touch "SETTING" on "SELECT MONITOR ITEM" screen.
  8. Touch "AUTO TRIG" or "MANU TRIG" on "SET RECORDING CONDITION" screen.
  9. Touch "START" on "SELECT MONITOR ITEM".
scientia non olet · About LEMON Manuals