LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> 350Z 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    CONTINUITY SPECIFICATION

    Condition Continuity
    Clutch pedal: Fully released Should exist.
    Clutch pedal: Slightly depressed Should not exist.

    If NG, adjust ASCD clutch switch installation, refer to "CLUTCH PEDAL ", and perform step 3 again.

    Fig 1: ASCD Clutch Switch Terminals 1 & 2 Continuity Test
    G02402235Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals