DTC P0340, P0345: CMP Sensor (Phase): Wiring Diagram: Notes

Fig 1: Wiring Diagram - CMP Sensor (PHASE) - EC-PHSB1-01

Courtesy of NISSAN MOTOR CO., U.S.A.

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.

Fig 2: Terminal Reference Chart

Courtesy of NISSAN MOTOR CO., U.S.A.