LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> 350Z 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    CONTINUITY SPECIFICATION

    CONDITION Continuity
    Brake pedal:Fully released Should exist.
    Brake pedal:Slightly depressed Should not exist.

    If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL ", and perform step 3 again.

    Fig 1: ASCD Brake Switch Terminals 1 & 2 Continuity Test
    G02402234Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals