LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 306 (Front Suspension) >> Removal & Installation >> Coil Spring & Strut Assembly >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Coil Spring & Strut Assembly: Removal

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Remove wheel. Remove engine undercover. Disconnect ABS sensor wire and front brake hose from brackets on front shock absorber.
  2. Remove mounting bolt and nut between shock absorber and transverse link. Remove tower bar (Coupe only). Remove mounting nuts on mounting insulator, then remove shock absorber from vehicle.
  3. Secure strut assembly in a soft-jaw vise. Slightly loosen piston rod lock nut. Compress spring with spring compressor and remove piston rod lock nut. Remove spring from strut assembly.