LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2308 (Engine Control System - DTCS U1000 To P0153) >> DTC P0101 MAF Sensor >> DTC Confirmation Procedure >> Procedure For Malfunction A >> With CONSULT-II
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

With CONSULT-II

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and warm it up to normal operating temperature.
  4. Run engine for at least 10 seconds at idle speed.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
Fig 1: Consult-II DATA MONITOR Display Screen
G04080354Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals