LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 226 (Air Bag Restraint Systems) >> Diagnostics >> Clearing Codes >> Using Consult Tester
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Using Consult Tester

WARNING: This page is about a different car, the 2003 Infiniti QX4. However, it is still accessible from the selected car via links, so may be relevant.
  1. After repairing system, connect both battery cables. Connect CONSULT tester to Data Link Connector (DLC), located under left side of instrument panel. See Figure . Turn ignition on. Touch START (NISSAN BASED VHCL). Touch AIRBAG. Touch SELF-DIAG (CURRENT). If no malfunction is detected, repair is complete. Touch ERASE to erase code retained in memory. Go to next step. If fault message is displayed, either the malfunction has not been repaired or another malfunction is detected. Go to CURRENT CODES USING CONSULT TESTER  .
  2. Touch BACK until SELECT SYSTEM is displayed. Touch SELF DIAG (PAST). Ensure no self-diagnostic fault message is present. Touch BACK until SELECT SYSTEM appears. Turn ignition off. Turn off CONSULT tester. Disconnect CONSULT tester from DLC.
scientia non olet · About LEMON Manuals