LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2084 (Glass, Window System & Mirrors) >> Front Door Glass And Regulator >> Door Module Assembly >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Door Module Assembly: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door speaker. Refer to "FRONT DOOR SPEAKER ".
  2. Remove the inside seal.
  3. Remove 2 hole covers over glass bolts.
  4. Temporarily reconnect the power window main switch and raise/lower the door window until the glass bolts can be seen.
    Fig 1: Locating Power Window Main Switch And Door Window Glass Bolts
    G04917156Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove the glass bolts.
  6. Raise the front door glass and hold in place with suitable tool.
  7. Remove the bolts and the module assembly.
  8. Disconnect the harness connector for the module assembly, and unclip the harness from the back.
    Fig 2: Cutting Harness Connector
    G04877413Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals