LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1708 (Body, Lock & Security System (Coupe)) >> Remote Keyless Entry System >> CONSULT-II Function (BCM) >> "IPDM E/R" >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

"IPDM E/R": Notes

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "OFF".
  2. Connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector.
    Fig 1: Locating Data Link Connector
    G04083857Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch "ON".
  4. Touch "START(NISSAN BASED VHCL)".
    Fig 2: Consult-II Display Screen
    G04151184Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "IPDM E/R".

    If "IPDM E/R" is not indicated, go to "CONSULT-II Data Link Connector (DLC) Circuit ".

    Fig 3: Consult-II SELECT SYSTEM Display Screen
    G04083859Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Select diagnosis mode.

    "SELF-DIAG RESULTS""DATA MONITOR" and "ACTIVE TEST" are available.

    Fig 4: Consult-II SELECT DIAG MODE Display Screen
    G04083861Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals