LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1708 (Body, Lock & Security System (Coupe)) >> Intelligent Key System >> Check CAN Communication System
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Check CAN Communication System

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SELF-DIAGNOSTIC RESULTS 
    CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which performs CAN communication.

    With CONSULT-II 

    • Connect CONSULT-II, and turn ignition switch ON.
    • Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
    • Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
    • Check display content in self-diagnostic results.
      CONSULT-II DISPLAY ITEM AND DTC CODE REFERENCE

      CONSULT-II display item DTC code
      NO DTC IS DETECTED -
      CAN COMM U1000
      CAN COMM2 U1010

    OK or NG 

    NO DTC IS DETECTED: INSPECTION END

    CAN COMM [U1000]: After printing "SELF-DIAGNOSIS RESULTS", go to "CAN SYSTEM", Refer to "Precautions When Using CONSULT-II ".

    CAN COMM2 [U1010]: Replace Intelligent Key unit.

scientia non olet · About LEMON Manuals