LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1261 (Unified Meter And A/C Amp) >> Unified Meter And A/C Amp >> CONSULT-II Function a >> Data Monitor >> Operation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  2. Touch either "MAIN SIGNALS", "CAN DIAG SUPPORT MNTR" or "SELECTION FROM MENU" on the "DATA MONITOR" screen.
    DATA MONITOR SPECIFICATION

    MAIN SIGNALS Monitors main signals.
    CAN DIAG SUPPORT MNTR Monitors CAN diagnosis support.
    SELECTION FROM MENU Selects and monitors individual signal.
  3. Touch "START".
  4. When "SELECTION FROM MENU" is selected, touch individual items to be monitored. When "MAIN SIGNALS" is selected, main items will be monitored.
  5. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
    Fig 1: Identifying Scan Tool Display With CONSULT-II
    G03495356Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals